PLANET SGSD-1022 - Manual (Page 314)

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
Figure 4-11-35 Settings screenshot
Figure 4-11-36 Settings screenshot
4.11.13.3 Extended ACL
Specify the action (i.e., Permit or Deny). Specify the source and/or destination addresses. Select the address type (Any, Host, or
IP). If you select “Host,” enter a specific address. If you select “IP,” enter a subnet address and the mask for an address range.
Set any other required criteria, such as service type, protocol type, or TCP control code. Then click Add.
314