PLANET SGSD-1022 User Manual
Page 213
User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
Figure 4-9-1 IGMP Configuration page screenshot
The page includes the following fields:
Object
Description
• IGMP Status
When enabled, the switch will monitor network traffic to determine which hosts
want to receive multicast traffic. This is also referred to as IGMP Snooping.
(Default: Enabled)
• Act as IGMP Querier
When enabled, the switch can serve as the Querier, which is responsible for
asking hosts if they want to receive multicast traffic.
This feature is not supported for IGMPv3 snooping.
(Default: Disabled)
• IGMP Query Count
Sets the maximum number of queries issued for which there has been no
response before the switch takes action to drop a client from the multicast group.
Range: 2-10;
Default: 2
• IGMP Query Interval
Sets the frequency at which the switch sends IGMP host-query messages.
Range: 60-125 seconds;
Default: 125
• IGMP Report Delay
Sets the time between receiving an IGMP Report for an IP multicast address on a
port before the switch sends an IGMP Query out of that port and removes the
entry from its list.
Range: 5-25 seconds;
Default: 10
213