TA Triumph-Adler DC 6140L User Manual
Page 60
Preparation before Use
2-26
Setting the WIA Driver (Windows Vista™, Windows® Server 2008 and Windows 7)
Register this machine to the WIA Driver.
NOTE:
The following is not necessary to register when using the machine possesses an IP address or host name
that you have specified during installation of WIA Driver.
1
Click Start, Control Panel and then Scanners and Cameras. For Windows 7, in the search box, type scanners
and cameras, and then click Scanners and Cameras.
2
Select the same name as this machine from WIA Drivers, and press Properties.
NOTE:
If Windows Security and User Account Control are displayed, no trouble should be found with operation
after installing the driver and software we have provided. Continue installation.
3
Click the Settings tab and select Image Compression and the Compression Level. If user login administration
is invalid, go to Step 5.
NOTE:
When the machine's IP address is unknown, contact Administrator.
4
Select the checkbox beside Authentication, enter Login User Name (up to 64 characters) and Password (up to
64 characters) and then click OK.