TA Triumph-Adler DC 6140L User Manual
Page 256
8-60
Default Setting (System Menu)
Border Line
Select the default value for border line when [2 in 1] is selected for Combine. Items available for the default value are
as follows:
Use the procedure below to select the default value for border line.
1
In the Sys. Menu/Count. menu, press the U or V key to
select [Common Settings].
2
Press the OK key. The Common Settings menu appears.
3
Press the U or V key to select [Function Default].
4
Press the OK key. The Function Default menu appears.
5
Press the U or V key to select [Detail Setting].
6
Press the OK key. The Detail Setting menu appears.
7
Press the U or V key to select [Border Line].
Item
Description
None
No border line.
l
Solid Line
Draws solid border lines.
m
Dotted Line
Draws dotted border lines.
n
Positioning Mark
Puts a mark on the border line position.
Sys. Menu/Count.: a
b
3 System
4 User/Job Account
*********************
[ Exit
]
5 Common Settings
Common Settings: a
b
*********************
2 Default Screen
3 Sound
[ Exit
]
1 Language
Function Default: a
b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit
]
1 Color Selection
Detail Setting:
a
b
*********************
2 4 in 1 Layout
3 Border Line
[ Exit
]
1 2 in 1 layout