TA Triumph-Adler DC 6140L - Manual (Page 230)

8-34
Default Setting (System Menu)
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
4 The Timer Settings menu appears.
5 Press the U or V key to select [Err. Clear Timer].
6 Press the OK key. Err. Clear Timer appears.
7 Press the U or V key to set the Error Clear Timer. Set
the amount of time before clearing errors in seconds.
You cannot use the numeric keys to enter this value.
8 Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
Auto Sleep
If no job runs for a certain period of time, automatically enter Sleep Mode. Refer to Sleep and Auto Sleep on page 2-
8 for Sleep Mode.
• Auto Sleep ON/OFF
Select whether to use Auto Sleep or not. The default setting is On.
NOTE: Time remaining before Auto Sleep can be modified as necessary.
Use the procedure below to specify the auto sleep setting.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [Common Settings].
Login User Name: L b
*******************
Login Password:
[ Login ]
Timer Setting: a b
*********************
2 Sleep Timer
3 PanelReset Timer
[ Exit ]
1 Err. Clear Timer
Err. Clear Timer: * b
(5 - 495)
******30*sec.
Sys. Menu/Count.: a b
3 System
4 User/Job Account
*********************
[ Exit ]
5 Common Settings