TA Triumph-Adler DC 6140L User Manual
Page 254
8-58
Default Setting (System Menu)
4
Press the OK key. The Function Default menu appears.
5
Press the U or V key to select [Detail Setting].
6
Press the OK key. The Detail Setting menu appears.
7
Press the U or V key to select [2 in 1 Layout].
8
Press the OK key. 2 in 1 Layout appears.
9
Press the U or V key to select [g L to R f T to B] or
[e R to L].
10
Press the OK key. Completed. is displayed and the
screen returns to the Detail Setting menu.
4 in 1 Layout
Select the default value for layout when [4 in 1] is selected for Combine. Items available for the default value are as
follows:
Use the procedure below to select the default value for layout.
1
In the Sys. Menu/Count. menu, press the U or V key to
select [Common Settings].
Function Default: a
b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit
]
1 Color Selection
Detail Setting:
a
b
*********************
2 4 in 1 Layout
3 Border Line
[ Exit
]
1 2 in 1 layout
2 in 1 Layout
a
b
*********************
2 e R to L
1 *g L to R f T to B
Item
Description
h
Right then Down
Arranges from upper left to right.
i
Down then Right
Arranges from upper left to bottom.
j
Left then Down
Arranges from upper right to left.
k
Down then Left
Arranges from upper right to bottom.
Sys. Menu/Count.: a
b
3 System
4 User/Job Account
*********************
[ Exit
]
5 Common Settings