Appletalk setup, Appletalk setup …8-132 – TA Triumph-Adler DC 6140L User Manual
Page 328
8-132
Default Setting (System Menu)
6
Press the OK key. NetWare appears.
7
Press the U or V key to select [On] or [Off].
If you select [On] and press the OK key, Frame Type
appears. Press the U or V key to select the desired
frame type.
The available frame types are as follows:
Auto
802.3
Ether-II
802.2
SNAP
8
Press the OK key. Completed. is displayed and the
screen returns to the Network Setting menu.
For detailed information on restarting the system, refer to
Restarting the System on page 8-119.
AppleTalk Setup
Select the Apple Talk network connection. The default setting is On.
Use the procedure below to setup the AppleTalk setting.
1
In the Sys. Menu/Count. menu, press the U or V key to
select [System], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2
The System menu appears.
NetWare:
a b
*********************
2 On
1 *Off
Frame Type:
a b
*********************
2 802.3
3 Ether-II
1 *Auto
Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
[ Exit
]
3 System
Login User Name: L
b
*******************
Login Password:
[ Login
]
System:
a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit
]
1 Network Setting