Quick copy mode – TA Triumph-Adler DC 6140L User Manual
Page 174
6-10
Document Box
8
Press the U or V key to select the file to be printed, and
then press [Select] (the Right Select key). The selected
file will be marked.
If you need to add another file, repeat this procedure to
select the file.
NOTE:
To select all files, press Menu (the Left Select key)
and select [Select All]. To deselect all files, select [Clear All].
To show file details, select [Detail].
9
Press the OK key. The file print and delete selection
menu appears.
10
Press the U or V key to select [Print] and press the OK
key.
NOTE:
To delete the selected file without printing it, select
[Delete] and press the OK key. The file deletion confirmation
screen appears. Press [Yes] (the Left Select key).
Completed. appears and the file is deleted.
11
The ID entry screen appears. Enter the ID and press the
OK key.
12
The number of copies screen appears. Set the number
of copies and press the OK key.
13
The file print confirmation screen appears. Press [Yes]
(the Left Select key). Accepted appears and printing
begins.
Quick Copy mode
This mode is used to print an additional copy of a document that has already been printed. If a document is printed
with Proof and hold selected in the print
ing system driver, the document will be simultaneously stored on the RAM disk.
The required number of copies can be printed whenever needed from the operation panel. If more documents than the
Menu:
a
b
*********************
2 Clear All
3 Detail
1 Select All
Fiala:
a
b
*********************
2 Delete
1 Print
ID
:
b
*********************
1216
S
Copies:
M
b
(1 - 999,---)
**********copies
---