TA Triumph-Adler LP 218 - Manual (Page 86)

4-3
Chapt
er
4
P
C
L
P
ri
n
ter
Dri
v
er
Installing the USB Device Driver for the Laser Printer
300 Series
Installing the USB Device Driver for the
Laser Printer 300 Series
When connecting the Laser Printer 300 Series printer to your computer
with a USB cable, install the USB device driver according to the fol-
lowing instructions before installing the printer driver.
This printer cannot be connected with a USB cable to a computer run-
ning Windows 95 or Windows NT 4.0.
To Install the USB Device Driver Under
Windows 98
1
Turn on your computer and start up Windows 98.
2
Turn on the printer.
3
Check that Windows 98 has finished starting up and that the
printer is ready.
4
Insert the Printer Driver CD-ROM that comes with your printer
into your computer’s CD-ROM drive.