TA Triumph-Adler LP 218 - Manual (Page 211)

6-30
Indicator Lights (Printer Messages)
Ch
apt
e
r
6
T
roubl
e
s
h
oot
in
g
Indicator Lights (Printer Messages)
The three indicator lights on the printer’s control panel turn on, turn
off, or blink in fixed patterns to let you know the current status of the
printer. Refer to the following sections for descriptions of each indica-
tor light pattern and the action you need to take when it occurs.
Indicator Light Patterns
The following are the three types of indicator light patterns produced
on the control panel.
1. Standard status pattern
Shows the current printer status.
2. Operator call pattern
The printer stops processing and goes offline when this message is
shown.
3. Call for service pattern
This pattern is shown when the printer detects a mechanical prob-
lem that requires service by an authorized technical representative.
Call customer support if this message is shown.
Paper (amber) indicator
Error (red) indicator
Ready (green) indicator
Panel button
Off On Blinking