TA Triumph-Adler LP 218 - Manual (Page 195)

6-14
Print Quality Problems
Ch
apt
e
r
6
T
roubl
e
s
h
oot
in
g
Blurred back-
ground The imaging
cartridge may
be defective. Remove the imaging car-
tridge and check it for dam-
age.
Replace the imaging car-
tridge if necessary. See
“Replacing the Imaging Car-
tridge” on page 5-1 for
details.
Uneven print
density The toner may
be unevenly dis-
tributed inside
the imaging car-
tridge. Remove the imaging car-
tridge and rock it left and
right a few times to distribute
remaining toner.
If the problem persists,
replace the imaging car-
tridge. See “Replacing the
Imaging Cartridge” on page
5-1 for details.
The imaging
cartridge may
be defective. Remove the imaging car-
tridge and check it for dam-
age.
Replace the imaging car-
tridge if necessary. See
“Replacing the Imaging Car-
tridge” on page 5-1 for
details.
Symptom Cause Remedy