TA Triumph-Adler LP 218 - Manual (Page 206)

6-25
Ch
apt
e
r
6
T
roubl
e
s
h
oot
in
g
USB Connection Problems
• If Laser Printer 300 Series does not appear below Univer-
sal serial bus controller , the USB device driver is not
installed correctly. (For more details, refer to “Installing the
USB Device Driver for the Laser Printer 300 Series” on page
4-3.)
With Windows 2000, follow the procedure below.
3
Click the Hardware tab of the System Properties dialog, and
then click the Device Manager button.
The Device Manager dialog appears.
• If Laser Printer 300 Series appears below Universal Serial
Bus controllers , the USB device driver is correctly installed.
Perform a test print and if you still cannot print correctly,
continue to CHECK 3.
• If Laser Printer 300 Series does not appear below Univer-
sal Serial Bus controllers , the USB device driver is not
installed correctly. (For more details, refer to “To Install the
USB Device Driver Under Windows 2000” on page 4-9.)