TA Triumph-Adler LP 218 - Manual (Page 61)

2-34
Options
Chapt
er
2
S
e
tt
ing-Up
10
Replace the external side cover using the two screws provided to
secure it in place.
11
Print a Configuration Page (see page 2-16) and check to confirm
that the “Total Memory” item correctly shows the increase in
memory capacity. If it does not, repeat the above steps making
sure that the expansion memory is installed correctly.
Note
◆ To release the expansion memory from the socket, push out on the
taps on each side of the socket.
◆ Once the expansion memory has been installed, be sure to reset
the Printer Memory Setting to reflect the new memory capacity
(see “Using the Control Panel” on page 4-63).