Print quality problems – TA Triumph-Adler LP 218 User Manual
Page 194
6-13
Ch
apt
e
r
6
T
roubl
e
s
h
oot
in
g
Print Quality Problems
Printout too light
The Toner Save
setting of the
printer driver is
set to “On”.
Change the setting and try
printing again.
The imaging
cartridge may
be running out
of toner.
Remove the imaging car-
tridge and rock it left and
right a few times to distribute
remaining toner.
If the problem persists,
replace the imaging car-
tridge. See “Replacing the
Imaging Cartridge” on page
5-1 for details.
The imaging
cartridge may
be defective.
Remove the imaging car-
tridge and check it for dam-
age.
Replace the imaging car-
tridge if necessary. See
“Replacing the Imaging Car-
tridge” on page 5-1 for
details.
Printout too dark
The imaging
cartridge may
be defective.
Remove the imaging car-
tridge and check it for dam-
age.
Replace the imaging car-
tridge if necessary. See
“Replacing the Imaging Car-
tridge” on page 5-1 for
details.
Symptom
Cause
Remedy