RIGOL M300 User Manual
Page 81

Chapter 3 Commands Compatibility
RIGOL
Programming Guide for DM3000
3-15
SYSTem:COMMunicate:LAN:SMASk
"
SYSTem:LANGuage?
SYSTem:LANGuage {EN|CH}
Query and set the display language (Chinese or
English) of the instrument.
SYSTem:VERSion?
Query the version of the SCPI (Standard Commands
for Programmable Instruments) standard that is
used by the instrument.
SYSTem:ERRor?
Read and clear an error from the instrument's error
queue.
TRIGger:COUNt? [{MIN|MAX}]
TRIGger:COUNt
{
Query and set the number of triggers of the
instrument.
TRIGger:DELay? [{MIN|MAX}]
TRIGger:DELay {
Query and set the delay between the trigger signal
and the measurement.
TRIGger:DELay:AUTO?
TRIGger:DELay:AUTO {ON|OFF|1|0}
Query and set the state of the auto trigger delay
function.
TRIGger:SLOPe?
TRIGger:SLOPe
Query and set the edge type (rising edge or falling
edge) of external trigger of the instrument.
can be POSitive or NEGative.
TRIGger:SOURce?
TRIGger:SOURce
Query and set the current trigger source of the
instrument.
Note: commands marked with * are only applicable to DM3064, DM3062, DM3054
and DM3052.