RIGOL M300 - Manual (Page 49)

Chapter 2 Command System RIGOL
Programming Guide for DM3000 2-37
:TRIGger:AUTO:HOLD {ON|OFF|1|0}
Function Enable or disable the auto trigger delay function.
The query returns ON or OFF.
Default OFF
4. :TRIGger:AUTO:HOLD:SENSitivity
Syntax
:TRIGger:AUTO:HOLD:SENSitivity?
:TRIGger:AUTO:HOLD:SENSitivity {0|1|2|3|MIN|MAX|DEF}
Function Set the sensitivity of the auto trigger delay.
The query returns 0, 1, 2 or 3.
Explanation The sensitivity corresponding to each parameter is as follows.
Value Sensitivity
0 0.01%
1 0.1%
2 1%
3 10%
MAX 10%
MIN 0.01%
DEF 0.1%
5. :TRIGger:SINGle
Syntax
:TRIGger:SINGle?
:TRIGger:SINGle {
|MIN|MAX|DEF}
Function Set the number of samples for single trigger.
Explanation  ranges from 1 to 1000.
 The “DEF” is 1.
6. :TRIGger:SINGle:TRIGger
Syntax
:TRIGger:SINGle:TRIGger
Function Execute single trigger.
Explanation First, select the single trigger source using the :TRIGger:SOURce
SINGLE command; otherwise, this command is invalid.
7. :TRIGger:EXT
Syntax
:TRIGger:EXT?
:TRIGger:EXT {RISE|FALL}
Function Set the external trigger type to RISE or FALL.