RIGOL M300 User Manual
Page 79

Chapter 3 Commands Compatibility
RIGOL
Programming Guide for DM3000
3-13
[SENSe:]VOLTage[:DC]:IMPedance:AUTO
{ON |1}
respond to it.
[SENSe:]VOLTage[:DC]:NPLC? [{MIN|MAX}]
[SENSe:]VOLTage[:DC]:NPLC
{
Query and set the integral time of DC voltage
measurement. The input value and return value are
both multiples of PLC.
Note: DM3000 only receives the command but
does not support the NPLC value setting function.
[SENSe:]VOLTage[:DC]:NULL[:STATe]?
[SENSe:]VOLTage[:DC]:NULL[:STATe]
{ON|OFF}
Query and set the state of the Null function of DC
voltage measurement.
[SENSe:]VOLTage[:DC]:NULL:VALue?
[{MIN|MAX}]
[SENSe:]VOLTage[:DC]:NULL:VALue
{
Query and set the Null value of DC voltage
measurement.
[SENSe:]VOLTage[:DC]:PEAK:STATe?
[SENSe:]VOLTage[:DC]:PEAK:STATe
{ON|OFF}
Query and set the state of the peak-peak
measurement function of DC voltage measurement.
Note: DM3000 only receives the command but
does not support the peak-peak measurement
function.
[SENSe:]VOLTage[:DC]:RANGe:AUTO?
[SENSe:]VOLTage[:DC]:RANGe:AUTO
Query and set the state of the auto range function
of DC voltage measurement.
[SENSe:]VOLTage[:DC]:RANGe[:UPPer]?
[{MIN|MAX}]
[SENSe:]VOLTage[:DC]:RANGe[:UPPer]
{
Query and set the range of DC voltage
measurement.
[SENSe:]VOLTage[:DC]:RESolution?
[{MIN|MAX}]
[SENSe:]VOLTage[:DC]:RESolution
{
Query and set the reading resolution of DC voltage
measurement.
SAMPle:TIMer? [{MIN|MAX}]
SAMPle:TIMer {
Query and set the sample interval.
SYSTem:BEEPer:STATe?
SYSTem:BEEPer:STATe
Query and set the state of the beeper.
The range of
SYSTem:BEEPer[:IMMediate]
This command causes the beeper to buzz once.
Note: this command is only effective when the