Utility:interface:lan:dhcp, Utility:interface:lan:autoip, Utility:interface:lan:manuip – RIGOL M300 User Manual
Page 44: Utility:interface:lan:ip

RIGOL
Programming Guide for DM3000
2-32
1. :UTILity:INTErface:LAN:DHCP
Syntax
:UTILity:INTErface:LAN:DHCP?
:UTILity:INTErface:LAN:DHCP {ON|OFF|1|0}
Function
Enable or disable the DHCP setting.
The query returns ON or OFF.
Explanation
The three modes (DHCP, Auto IP and Manual IP) are not permitted
be disabled at the same time.
Default
ON
2. :UTILity:INTErface:LAN:AUTOip
Syntax
:UTILity:INTErface:LAN:AUTOip?
:UTILity:INTErface:LAN:AUTOip {ON|OFF|1|0}
Function
Enable or disable the AutoIP setting.
The query returns ON or OFF.
Explanation
The three modes (DHCP, Auto IP and Manual IP) are not permitted
be disabled at the same time.
Default
ON
3. :UTILity:INTErface:LAN:MANUip
Syntax
:UTILity:INTErface:LAN:MANUip?
:UTILity:INTErface:LAN:MANUip {ON|OFF|1|0}
Function
Enable or disable the ManualIP setting.
Explanation
The three modes (DHCP, Auto IP and Manual IP) are not permitted
be disabled at the same time.
Default
OFF
4. :UTILity:INTErface:LAN:IP
Syntax
:UTILity:INTErface:LAN:IP?
:UTILity:INTErface:LAN:IP
Function
Users define the IP address of the multimeter.
Explanation
The format of
is “nnn.nnn.nnn.nnn”. The first
“nnn” ranges from 0 to 223 (except 127) and the others range
from 0 to 255.
The IP address configuration type should be Manual and both
DHCP and AutoIP should be disabled when you use this
command.