RIGOL M300 User Manual

Page 74

RIGOL

Chapter 3 Commands Compatibility

Programming Guide for DM3000

3-8

[SENSe:]FREQuency:RANGe:LOWer
{|MIN|MAX|DEF}

200. The “DEF” is 20.

[SENSe:]FREQuency:VOLTage:RANGe:AUTO
?
[SENSe:]FREQuency:VOLTage:RANGe:AUTO

Query and set the state of the voltage auto range
function of frequency measurement.

[SENSe:]FREQuency:VOLTage:RANGe[:UPPe
r]? [{MIN|MAX}]
[SENSe:]FREQuency:VOLTage:RANGe[:UPPe
r] {|MIN|MAX|DEF}

Query and set the voltage range of frequency
measurement.

[SENSe:]FRESistance:APERture?
[{MIN|MAX}]
[SENSe:]FRESistance:APERture
{|MIN|MAX|DEF}

Query and set the aperture time of 4-wire resistance
measurement.
Note: DM3000 only receives this command but
does not response to it.

[SENSe:]FRESistance:NPLC? [{MIN|MAX}]
[SENSe:]FRESistance:NPLC
{|MIN|MAX|DEF}

Query and set the aperture time of 4-wire resistance
measurement. The input value and return value are
both multiples of PLC.
Note: DM3000 only receives this command but
does not support the NPLC value setting function.

[SENSe:]FRESistance:NULL[:STATe]?
[SENSe:]FRESistance:NULL[:STATe]
{ON|OFF}

Query and set the state of the NULL function of
4-wire resistance measurement.

[SENSe:]FRESistance:NULL:VALue?
[{MIN|MAX}]
[SENSe:]FRESistance:NULL:VALue
{|MIN|MAX}

Query and set the NULL value of 4-wire resistance
measurement.

[SENSe:]FRESistance:RANGe:AUTO?
[SENSe:]FRESistance:RANGe:AUTO

Query and set the state of the auto range function
of 4-wire resistance measurement.

[SENSe:]FRESistance:RANGe[:UPPer]?
[{MIN|MAX}]
[SENSe:]FRESistance:RANGe[:UPPer]
{|MIN|MAX|DEF}

Query and set the range of 4-wire resistance
measurement.

[SENSe:]FRESistance:RESolution?
[{MIN|MAX}]
[SENSe:]FRESistance::RESolution
{|MIN|MAX|DEF}

Query and set the reading resolution of 4-wire
resistance measurement.

[SENSe:]FUNCtion[:ON]?

Query and set the current measurement function of