RIGOL M300 - Manual (Page 48)

RIGOL Chapter 2 Command System
Programming Guide for DM3000 2-36
1. :TRIGger:SOURce
Syntax
:TRIGger:SOURce?
:TRIGger:SOURce {AUTO|SINGLE|EXT}
Function Set the trigger source of the measurement to AUTO, SINGLE or
EXT.
The query returns AUTO, SINGLE or EXT.
Default AUTO
2. :TRIGger:AUTO:INTErval
Syntax
:TRIGger:AUTO:INTErval?
:TRIGger:AUTO:INTErval
Function Set the display interval of the multimeter. The default unit is ms.
The query returns the interval with the unit (ms).
Explanation The range of is related to the current reading resolution.
DM306x
Reading resolution Default
4 ½
(ACV/ACI, 3 ½)
30 ms - 7000 ms 30 ms
5 ½ 200 ms - 7000 ms 200 ms
ACV/ACI, 4 ½ 300 ms - 7000 ms 300 ms
6 ½
(ACV/ACI, 5 ½)
400 ms - 7000 ms 400 ms
DM305x
Reading resolution Default
3 ¾
(ACV/ACI/DCI, 3 ½)
30 ms - 7000 ms 30 ms
4 ¾
(DCI, 4 ½)
200 ms - 7000 ms 200 ms
ACV/ACI, 4 ½ 300 ms - 7000 ms 300 ms
5 ¾
(ACV/ACI/DCI, 5 ½)
400 ms - 7000 ms 400 ms
Example Set the interval to 1000 ms:
:TRIGger:AUTO:INTErval 1000
The query returns 1000 ms.
3. :TRIGger:AUTO:HOLD
Syntax
:TRIGger:AUTO:HOLD?