RIGOL M300 - Manual (Page 80)

RIGOL Chapter 3 Commands Compatibility
Programming Guide for DM3000 3-14
beeper is enabled.
SYSTem:COMMunicate:ENABle?
DM3000 only receives this command but does not
respond to it.
SYSTem:COMMunicate:ENABle
, DM3000 only receives this command but does not
respond to it.
SYSTem:COMMunicate:GPIB[:SELF]:ADDRes
s? *
SYSTem:COMMunicate:GPIB[:SELF]:ADDRes
s {
Query and set the GPIB address.
SYSTem:COMMunicate:LAN:BSTatus? * Query the LAN interface state of the instrument.
SYSTem:COMMunicate:LAN:CONTrol? *
This command reads the number of the initial
terminal of Sockets.
Note: DM3000 only receives this command but the
interface does not support Socket communication.
SYSTem:COMMunicate:LAN:DDNS? *
SYSTem:COMMunicate:LAN:DDNS * Query and set the state of the dynamic DNS
(domain name server).
SYSTem:COMMunicate:LAN:DHCP? *
SYSTem:COMMunicate:LAN:DHCP *
Query and set the state of DHCP.
SYSTem:COMMunicate:LAN:DNS? *
SYSTem:COMMunicate:LAN:DNS
"
Query and set the address of static DNS.
SYSTem:COMMunicate:LAN:GATEway?
[{CURRent|STATic}*
SYSTem:COMMunicate:LAN:GATEway
"
Query and set the current default gateway of the
instrument.
SYSTem:COMMunicate:LAN:HOSTname?
[{CURRent|STATic}]*
SYSTem:COMMunicate:LAN:HOSTname
""*
Query and set the current host name of the
instrument.
SYSTem:COMMunicate:LAN:IPADdress?
[{CURRent|STATic}]*
SYSTem:COMMunicate:LAN:IPADdress
"
Query and set the current IP (Internet Protocol)
address of the instrument.
SYSTem:COMMunicate:LAN:MAC? *
Query the MAC (Media Access Control) address,
namely the link layer address.
SYSTem:COMMunicate:LAN:SMASk?
[{CURRent|STATic}]* Query and set the current subnet mask of the
instrument.