System:beeper:state, System:beeper, System:configure:poweron – RIGOL M300 User Manual

Page 39: System:configure:default, System:language, System:clock:state

Chapter 2 Command System

RIGOL

Programming Guide for DM3000

2-27

1. :SYSTem:BEEPer
Syntax

:SYSTem:BEEPer

Function

Cause the beeper to buzz once. This command is usually used to
test whether the beeper works normally.

Explanation

Please enable the beeper before sending this command.

2. :SYSTem:BEEPer:STATe
Syntax

:SYSTem:BEEPer:STATe?
:SYSTem:BEEPer:STATe {ON|OFF|1|0}

Function

Set the beeper state.
The query returns ON or OFF.

Default

3. :SYSTem:CONFigure:POWEron
Syntax

:SYSTem:CONFigure:POWEron {LAST|DEF}

Function

Set the power-on configuration to LAST or DEF.

Default

DEF

4. :SYSTem:CONFigure:DEFault
Syntax

:SYSTem:CONFigure:DEFault

Function

Restore the instrument settings to default values.

5. :SYSTem:LANGuage
Syntax

:SYSTem:LANGuage?
:SYSTem:LANGuage {CHinese|ENglish}

Function

Set the display language.
The query returns CHINESE or ENGLISH.

Default

CHinese

6. :SYSTem:CLOCk:STATe
Syntax

:SYSTem:CLOCk:STATe?
:SYSTem:CLOCk:STATe {HIDE|DISPLay |1|0}

Function

Set the display mode of system clock.
“DISPLay” and “1” denote displaying the clock on the multimeter
interface; “HIDE” and “0” denote hiding the clock.
The query returns DISPLAY or HIDE.

Default

DISPLay