RIGOL DM3058 User Manual
Page 80
RIGOL
User’s Guide for DM3058/DM3058E
2-58
1. Choose the file location
Select local (C: \) or USB flash device (A: \) position to store files by switching
Disk menu continuously.
Figure 2-73 USB flash device storage Interface
NOTE: When storage the files to A-Disc, Please do not remove the USB
flash device.
2. Choose the storage type of the files
Choose the type of files that required to operation by Switching Type menu
continuously, which includes: MIRR_CFG, SysSetting, MeasData, MEAS_CSV,
Sensor and SensorData. Such as to select MeasData to enter the following
interface:
Figure 2-74 Select File type
Press Type to switch file type to read or save corresponding files.
3. File Operation
Use
and
buttons on the front panel to select file storage position
among File1 to File10, then, press Read, Save and Erase buttons to do the
corresponding operation. Press Save to enter the following interface.
Figure 2-75 Input File Name
File Name
Input Area
!