RIGOL DM3058 - Manual (Page 54)

RIGOL
User’s Guide for DM3058/DM3058E 2-32
 Press Name to create an appropriate name for the new sensor.
Figure 2-41 Name edit interface
File Name Input Method:
 Use the up/down direction keys to select the File Name or Input Area.
 Use the left/right direction keys to move the cursor to the position (File Name
Area) or character (Input Area).
 Press A, a and 1 to select the Capital letter, Lowercase letter or Numbers.
 The Del function can only delete the letter on which the cursor taking place.
 Press Done to save current file.
 Press
to return to the Prpty interface.
 Press Type to select the type of easy-to-measure physical quantity (DCV, DCI,
2WR, 4WR, FREQ and TC). Press the corresponding menu to select the type
and then, press to return to the Prpty interface.
Figure 2-42 Type selection interface
 Press Unit button to select the unit (°, °C, °F and %) for the measured
physical quantity. Furthermore, you can define a desired unit using the USER
function.
Figure 2-43 Unit selection interface
Explanations:
User-defined unit is limited within two characters.
Switch to the character which needs to be edited by the left/right direction keys.
Select required characters by the up/down direction keys from A-Z and a-z.
File Name
Input Area