RIGOL DM3058 - Manual (Page 67)

RIGOL
User’s Guide for DM3058/DM3058E 2-45
Statistic Measurement
The Statistic function is for DC voltage, AC voltage, DC current, AC current,
resistance, frequency/period, capacitance and sensor measurement.
The front panel can display the statistical data for any set of readings: average
(AVG), maximum (MAX), minimum (MIN), and which can read with All functions
and the number of samples taken (Total).
Press  STA, the display shows:
Figure 2-61 Stat. Math
Table 2-16 Statistic Measurement Menu Function Description
Function Menu Settings Description
MAX
To show the maximum statistic value of curre
nt measurement
MIN
To show the minimum statistic value of curre
nt measurement
AVG
To show the average statistic value of current
measurement
All
To show all statistic values
of current measurement
ON
ON
OFF
Turn on/off the selected statistic
measurement
Save all changes, back to a higher level
menu.
Statistic function
 In statistic function, the first reading is usually set to the maximum or
minimum value. When getting more readings, current displaying value is
always the maximum/minimum reading among all the measured values.

The maximum, minimum, average and reading quantities are stored in
volatile memory.