RIGOL DM3058 - Manual (Page 25)

RIGOL
User’s Guide for DM3058/DM3058E 2-3
Explanations:
 When the input signal is beyond the current scope of the measurement range,
the multimeter will show “OVER LOAD”.
 After restarting and remote reset, range options will turn back to default
“Auto”.
 You are suggested to select “Auto” range so as to protect the instrument
against damage and get exact datum as much as possible when it is hard to
predict the range of measurement.
 The range is fixed during testing the Continuity and Diodes. The range of
Continuity is selected as 2kΩ while the Diodes are 2.4V
.
NOTE
Other functions of the direction keys:
 In the Save interface, Up and Down keys are used to select location for
the saving files.
 During inputting data, Up and Down keys are used to change the
selected value. Each press for the up key, value will be increased 1,
vice versa.
 At the input interface of data, Left and Right keys are used to switch
the number of a numerical value. Each press for the Left key, former
number will be selected, vice versa.