RIGOL DM3058 - Manual (Page 57)

RIGOL
User’s Guide for DM3058/DM3058E 2-35
Figure 2-51 Apply new Sensor
After application, the data appearing in the interface is unavailable by “ ”.
2. If you found there are some problems existing please press Edit to modify.
Figure 2-52 Edit configuration file of Sensor
3. Press Load to recall configuration file within Sensor.
4. Press History to enter into the following interface to check the data getting
from this measurement and save.
Figure 2-53 View interface of History Information
There are three types of way for viewing historical date: “Info” and “List”.
Press Save after checking, by pressing Update, the History information will be
refreshed to be current newest information.
5. Set relative value (optional)
Press REL to open or close Relative operation. When it is open, “REL” is shown
over the screen and the reading displayed is a relative value which comes from
the result of actual measurement value subtracts the value that has been set.
(For the details about how to set, please refer to “
Math Functions” in
Chapter 2.)
6. Press Disp to set the display mode for the measurement result: only display
the measured result (select Meas); only display the corresponding result
(select Corrsp); when All is selected, the measured result will be shown on the
Vice display and the corresponding result will be shown on the Main display.