RIGOL DM3058 - Manual (Page 24)

RIGOL
User’s Guide for DM3058/DM3058E 2-2
To Select Range
For the multimeter, appropriate range could be selected according to the signals
input by “Automatic” or “Manual”. In Manual mode, you can obtain higher reading
precision via range select keys on the right side of the Front Panel. See the figure
below.
Figure 2-1 Range selection keys
Method 1:
Via Function keys on the Front Panel
Auto Range: Press
to choose Auto Range, meanwhile Manual Range is
forbidden.
Manual Range: Press Up or Down direction keys to increase or decrease range
gradually, at this moment, Auto Range is forbidden.
Method 2:
Via soft keys on the Measurement main interface shown in Figure 2-2.
Auto Range: Press Auto to choose Auto Range, meanwhile Manual Range is
forbidden.
Manual Range: Press Rng+
or Rng- to choose required range manually, at this
moment, Auto Range is forbidden.
Figure 2-2 Range selection menus
Automatic range
Increase range
Decrease range