RISCO Group ACIS User Manual
Page 86
User Manual for ACIS Version
Uncontrolled when printed
© RISCO Group
77
LDAP Server Name
Enter the LDAP Server name.
IP Address
Enter the IP address of the Server.
Port Number
Enter the port number.
3. Click Save. The new section is created and the message, “Section created successfully” appears. The
home page appears with the section details displayed on the home page.
Note: If you click Cancel, the section is not saved and the home page appears.
The newly created section appears on the home page with the ACPE details. You can edit the section.
Figure 66: New Section Created
9.1.1
LDAP Server Configuration
The Lightweight Directory Access Protocol or LDAP is an application protocol for querying and modifying
directory services running over TCP/IP. This authentication mechanism can be used in ACIS and ACUS.
The LDAP protocol defines operations that clients use to search and update the directory. Whenever an installer
logs on to ACIS, the RSP sends request to LDAP server for authentication with Installers login
credentials
.
The
users of RSP system can be authenticated using a LDAP server through the Proxy on the client’s LAN.