RISCO Group ACIS - Manual (Page 44)

User Manual for ACIS Version
Uncontrolled when printed © RISCO Group 35
Figure 24: Sensor Details
2. Select the Sensor row that you want to configure.
3. Enter the following details on the screen.
Table 5: Configure Sensor
Field Name Description
Sensor Name The Sensor Name appears. You can change as per your requirement.
Location
Click to select the location. The Location window, with a list of locations in
the Account appears. Select a location.
Rebound Delay It is the time taken by the output of the sensor to settle down and be functional
again. Longer the delay longer will be the response time of the sensor. The
default value is 60 seconds.
Send Events Select the Send Events check box to ensure that sensor sends an event to RSP
whenever there is a change in sensor status.
Enabled Click the Enabled option button to enable the sending events.
Normally Opened Select this check box if you want the status of the sensor to be Normally