RISCO Group ACIS - Manual (Page 2)

User Manual for ACIS Version
Uncontrolled when printed © RISCO Group i
About This Manual
Purpose
This manual has been written to help you understand and use the Access Control Installer Station (ACIS)
application. It presents the operational details and functional capabilities of the application.
Intended Audience
This manual is primarily intended for Installers who will use the ACIS application to register and configure
Proxies, Controllers and Doors. Installers can also create and manage Sections, create other installers and
generate section level reports.
Prerequisites for Use
Basic understanding of Access Control System is required. Basic understanding of Windows and GUI operations
is required. Knowledge of Web-based applications is essential. Basic knowledge of configuration of devices and
network addresses is essential.
Organisation of the Manual
The information in this document is organised as follows:
About ACIS introduces ACIS. It provides the software and hardware details required for ACIS.
Getting Started describes how to log on and log off from ACIS. It also provides an overview of the activities that
you need to perform after you set up firmware devices at the client side.
Registering Proxy describes the process to register and configure Proxy.
Registering Controller describes the process to register and configure Controller.
Door Configuration describes the process to configure Doors after controllers are configured.
Performing Built in Test for a Proxy describes how to test the Proxy from ACIS.
Performing Built in Test for a Controller describes how to test the Controller from ACIS.
Downloading Firmware describes the process to upgrade the firmware version.
Adding Locations describes the steps to add, rename and delete the location in ACIS.
Adding Sections describes the process to add new section.
Creating and Editing Installer Profiles tells you how to create new installers and edit the existing ones.
Generating Section Level Reports describes the reports that can be generated in ACIS.
Contact provides the contact details of Risco.
Glossary provides explanation for terms used in this manual.
Index of the terms, concepts and tasks in the manual are provided in this section.