RISCO Group ACIS - Manual (Page 12)

User Manual for ACIS Version
Uncontrolled when printed © RISCO Group 3
2
Getting Started with ACIS
ACIS is a Web-based application. This section describes how to logon to ACIS, log off from ACIS and perform all
tasks in the application. The ACIS user is known as Installer. When a new account is created (for a company that
has bought the RAC System), the operator specifies the installer company that will install the Risco Access
Control (RAC) system at the client side. The installer has a company reference ID and is assigned accounts where
he can install RAC system. The installer manually installs the hardware devices at the client site and then uses
ACIS Web application to configure them with the system.
2.1
Before Using ACIS
Before using ACIS, ensure that you have verified the following:
• You have the correct URL where ACIS is deployed.
• You have the correct user name, password and your installer company reference number to log on to
ACIS.
• To register the devices, you need to have the hardware devices and their details (such as proxy
reference number) with you.
• The devices must be boot up to be able to configure through ACIS.
2.2
Logging on to ACIS
When the operator creates an installer company successfully, then a system-generated email with the User
Name, OTP Device ID and Company reference ID is sent to installer’s email address. The Operator creates a main
installer. The main installer can create other installers.
To log on to ACIS:
1. Enter the URL of the ACIS application in your browser. The URL is in the format:
http:///ACIS