RISCO Group ACIS - Manual (Page 40)

User Manual for ACIS Version
Uncontrolled when printed © RISCO Group 31
Figure 22: Configuring the Controller
2. Enter the details in the following fields.
Table 3: Configure Controller
Field Name Description
Controller Name The controller name appears when the controller is registered. You
can enter a new controller name if required.
Time Zone Select the appropriate time zone. By default, controller will have the
time zone of the Proxy.
Proxy Name The name of the Proxy where the Controller is attached is displayed.
Battery Size When the device is running on battery, the percentage of battery
strength available is displayed in this field.
IP Address The IP address of the Controller is displayed. This is a read-only field.
MAC Address The MAC address of the Controller is displayed. This is a read-only
field.
Static The Static and DHP option buttons are read-only. The static function
makes the IP address constant. The IP is configured from the CFG file