MCZ Yari AIR - Manual (Page 43)

A
B
D
F
H
C
E
G
I
J
41
7-MAINTENANCE AND CLEANING
Technical Dept. - All rights reserved - Reproduction is prohibited
Yari Multiair upper stove compartment cleaning
When the stove is cold, take off cast iron top “A”, dismantle the sides as shown in the relative paragraphs of the manual. Unscrew the
screws that lock down the supports for top “B” and slide out cast iron grill “D”. Lift the cover of tank “C” and remove the screws that lock it
onto the structure. Dismantle back panel “E” by taking out all of the screws in the top and bottom parts. Take off top guard “F” by removing
the screws attached to the back panel of the tank, as well as those on the lateral columns. Unscrew the nut on the end fork of damper lever
“G” and lift top casing “H” by unscrewing the black screws that lock it onto the lateral double walls. Dismantle exchanger “I” by taking out
the screws that lock it onto the structure. Use the inspection hole for cleaning: using a stiff rod or a bottle brush, scrape the walls of the
firebox to make the ash fall into the bottom ash collection compartment. Clean and re-assemble everything using a new head gasket “J”.