MCZ Yari AIR - Manual (Page 17)

15
3-INSTALLATION AND ASSEMBLY
TECHNICAL CHARACTERISTICS YARI AIR YARI MULTIAIR
Nominal output power 9.5 kw (8170 kcal/h) 11 kw (9,640 kcal/h)
Minimal output power 2.4 kw (2,064 kcal/h) 2.4 kw (2,064 kcal/h)
Efficiency at Max 91,7% 90,2%
Efficiency at Min 94,1% 94,1%
Temperature of exhaust smoke at Max 180 °C 190 °C
Temperature of exhaust smoke at Min 100 °C 100 °C
Particulate/OGC / Nox (13%O
2
) 22 mg/Nm 3 - 5 mg/Nm 3 - 123 mg/Nm 3 17 mg/Nm 3 - 7 mg/Nm 3 - 136 mg/Nm 3
CO at 13% O
2
at Min and at Max 0,025 – 0,014% 0,025 – 0,013%
CO
2
at Min and at Max 5,7% - 8,7% 5,7% - 8,6%
Recommended draught at Max power 0.10 mbar - 10 Pa 0.10 mbar - 10 Pa
Recommended draught at Min power 0.05 mbar - 5 Pa 0.05 mbar - 5 Pa
Mass of smoke 7.7 g/sec 9.9 g/sec
Hopper capacity 44 litres 44 litres
Type of pellet fuel Pellet diameter 6-8 mm and size 5/30 mm Pellet diameter 6-8 mm and size 5/30 mm
Pellet hourly consumption Min ~ 0.6 kg/h* - Max ~ 2 kg/h* Min ~ 0.6 kg/h* - Max ~ 2.2 kg/h*
Autonomy At min ~ 48 h* - At max ~ 15 h* At min ~ 48 h* - At max ~ 13 h*
Heatable volume m 3 204/40 – 233/35 – 272/30 ** 247/40 – 283/35 – 330/30 **
Combustion air inlet External diameter 50 mm External diameter 50 mm
Smoke outlet External diameter 80 mm External diameter 80 mm
Air inlet 80 cm 2 80 cm 2
Nominal electrical power (EN 60335-1). 100 W (Max 420 W) 110 W (Max 420 W)
Supply voltage and frequency 230 Volt / 50 Hz 230 Volt / 50 Hz
Net weight 160 kg 160 kg
Weight with packaging 170 kg 170 kg
* Data that may vary depending on the type of pellets used.
** Heatable volume based on the required power per m 3 (respectively 40-35-30 Kcal/h per m 3 ).
Tested according to EN 14785 in accordance with Directive 89/106/EEC (Construction Products).
Technical Dept. - All rights reserved - Reproduction is prohibited