MCZ Yari AIR - Manual (Page 36)

Lun ON
GIORNI
PROGRAM.1
Dom OFF
GIORNI
PROGRAM.1
34
5 - MODE AND SETTINGS
• We will now select the day we wish the set times to be applied: select the day using button 2. In this case I will stop at ‘MON’
(Monday) and using button 1 I will set it at ‘ON’; I will press button 2 again and set day ‘TUE’ (Tuesday) at ‘OFF’ using button 1; I will
press button 2 again and, for the third day, set ‘WED’ (Wednesday) at ‘ON’ using button 1; and so forth, up to day ‘SUN’ (Sunday). To
confirm the entire set-up press 6 MENU.
Proceeding with 6 MENU, it is possible to set other times and days in programmes 2, 3 and 4 which appear in sequence
after programme 1.
The "OFF" option can be set for the ignition time of each programme by scrolling to a time after 23:30 or before 00:00. In this case the
current programme will be disabled, and by pressing 6 MENU you will move directly onto the ignition of the next programme. The
programme is re-enabled for navigation when a valid ignition time is set.
IMPORTANT NOTE
The stove requires about 10 minutes before sufficiently warm air comes out, and another 10 minutes before it is
up to full power. Take this into account when setting the start time. Likewise, stove shutdown requires about 30
minutes, during which the heat stored up by the stove is released into the room. Keep this in mind for substantial
fuel savings.
STOVE BEHAVIOUR WHEN ECO STOP AND CHRONO ARE ENABLED:
The stove is in.... Chrono will operate for.... The stove .....
ECO STOP Switch the stove off It switches off definitively in the OFF position.
It does not switch back on even if the temperature is not satisfied.
ECO STOP Turn the stove on The stove stays in STOP, it switches on when the room temperature
is not satisfied.