MCZ Yari AIR - Manual (Page 25)

23
3-INSTALLATION AND ASSEMBLY
Technical Dept. - All rights reserved - Reproduction is prohibited
LOADING THE PELLETS
Fuel is loaded from the upper part of the stove by opening the door. Pour the pellets in the hopper. When empty, it will hold about one
15 kg sack.
To ease the procedure carry out the operation in two steps:
• Pour half of the contents into the hopper and wait for the fuel to settle on the bottom
• Then complete the operation by pouring in the rest
Never remove the protective grille from inside the hopper. When loading pellets, keep the bag from coming
into contact with hot surfaces.