MCZ Yari AIR - Manual (Page 26)

Y
X
2 3
1 4
24
4 - REMOTE CONTROL AND CONTROL PANEL
GENERAL SPECIFICATIONS OF THE REMOTE CONTROL
The remote control runs on a 12V 23 A Alkaline battery and it is good practice, during extended periods of remote control downtime, to
take the battery out.
How to change the battery:
Using a flat tip screwdriver, put the tip in the slot (X) on the back of the remote control. Turn the screwdriver clockwise creating leverage
on the back panel (Y), unhooking it.
Remove the back panel (Y) and change the battery, putting it in place so that the (+) end is aligned with the (+) polarity engraved in the
battery housing of the remote control.
Put the back panel back on (Y).
Used batteries must be disposed of separately in special containers.
GRAPHIC APPEARANCE
Reference will often be made to the keys. Always keep the figure at hand for simplicity's sake.
REMOTE CONTROL OPERATION
GENERAL RULES
The remote control functions are listed here below:
Keys 2+3 to turn the stove on/off.
Key 1 decreases the temperature
Key 2 increases the temperature
Key 3 sets the stove power
Key 4 sets the fan power.