Epson PLQ-30 - Manual (Page 83)

2. Open the cover and press the release lever to move the upper mechanism. Then hold the jammed
paper with both hands and pull it out of the printer. If you can clear the paper jam, move the upper
mechanism to its original position by pulling the release lever and then close the printer cover. If it
is difficult to do so, go to the next step.
! Caution:
Make sure that you move the upper mechanism by pulling the release lever. Do not pull the
mechanism by hand. It may damage the printer.
3. Turn on the printer while pressing the F1/Eject button. The printer is in the paper removing mode
and ready to start feed operations. See the table below to find out how the F1/Eject and F2 buttons
work in this mode and execute the appropriate operation.
Button Press Hold for a few seconds
F1/Eject Feeds paper forward a few lines every time you press it. Eject paper forward.
F2 Feeds paper backward a few lines every time you press
it. Eject paper backward.
If you can clear the paper jam, turn off the printer, move the upper mechanism to its original
position by pulling the release lever, and then close the printer cover to finish the operation. If you
cannot clear the paper jam with this function, stop the operation and contact your dealer.
! Caution:
Make sure that you move the upper mechanism by pulling the release lever. Do not pull the
mechanism by hand. It may damage the printer.
Printing a Self Test
Running the printer’s self test helps you determine whether the printer or the computer is causing the
problem:
❏ If the self test results are satisfactory, the printer is working properly and the problem is probably
caused by your printer driver settings, application settings, computer, or interface cable. (Be sure
to use a shielded interface cable.)
❏ If the self test does not print properly, there is a problem with the printer. See “Problems and
Solutions” on page 75 for possible causes and solutions to the problem.
Note:
❏ Prepare an A4 size sheet of paper before entering the self-test printing mode.
PLQ-30/PLQ-30M User’s Guide
Troubleshooting 83