Epson PLQ-30 - Manual (Page 66)

Menu Values (default in bold)
0 slash 0,
Font Draft, Roman, Sans Serif, Courier, Prestige, Script, OCR-B, Orator,
Orator-S, Script C, Roman T(PS), Sans serif H(PS)
Pitch (cpi) 10, 12, 15, 17.1, 20, Proportional
Character table Standard model: Italic, PC437, PC850, PC860, PC863, PC865, PC861,
BRASCII, Abicomp, Roman 8, ISO Latin 1, PC858, ISO 8859-15
European model: Italic, PC437, PC850, PC437 Greek, PC853, PC855,
PC852, PC857, PC866, PC869, MAZOWIA, Code MJK, ISO 8859-7, ISO Latin
IT, Bulgaria, PC774, Estonia, ISO 8859-2, PC 866 LAT., PC 866 UKR, PC860,
PC861, PC865, PC864, PC APTEC, PC708, PC720, PC AR864, PC863,
BRASCII, Abicomp, Roman 8, ISO Latin 1, PC858, ISO 8859-15, PC 771,
PC437 Slovenia, PC MC, PC 1250, PC 1251
International character set for Italic table Italic U.S.A., Italic France, Italic Germany, Italic U.K., Italic Denmark 1,
Italic Sweden, Italic Italy, Italic Spain 1
Auto line feed Off, On
Auto CR (IBM PPDS) *1 Off, On
A.G.M. (IBM PPDS) *1 Off, On
IBM character table (IBM PPDS) *1 Table2, Table1
Columns 80, 90, 94
Paper loading Auto Load, Data Exists
*1 This setting is effective when IBM PPDS emulation is selected.
Software
This setting allows you to select the software format.
Interface
The printer provides built-in slots for three kinds of interfaces; Parallel, Serial, and USB. You can
choose Auto (automatic), Parallel, Serial, or USB, for the interface mode. When you select Auto, the
printer automatically selects the interface that is receiving data, and uses that interface until the end of
the print job. The Auto setting allows you to share the printer among multiple computers without
changing the interface mode.
If only one computer is connected to the printer, you can select Parallel, Serial, or USB depending on
which interface your computer uses.
PLQ-30/PLQ-30M User’s Guide
Control Panel 66