Epson PLQ-30 - Manual (Page 80)

Paper Handling
Paper loading or feeding problems
The printer does not load single-sheet paper or does not feed it properly.
Cause What to do
Single-sheet paper is not loaded properly. See “Loading Single Sheets” on page 18 for instructions on loading
single-sheet paper.
Paper is creased, old, too thin, or too thick. See the “Paper/Media” on page 111 for information about the
printable paper and use new, clean sheets of paper.
The printer does not fully eject a single sheet.
Cause What to do
Paper is too long. When the printer is in the PR2 mode, see “Clearing a Paper Jam” on
page 82 for instructions on ejecting paper. When you are in the
WNI4915 or EPSON Mode, press the F1/Eject button. When you
are in IBM4722 mode, press the Offline button and then the F1/
Eject button. Make sure the page length of your paper is within the
range specified for single-sheet paper in “Paper/Media” on
page 111. Also check and adjust the paper size setting in your
application or printer driver.
The printer does not load passbook or does not feed it properly.
Cause What to do
Passbook is not loaded properly. See “Loading Passbooks” on page 17 for instructions on loading
passbooks.
Network problems
The printer does not print when using a network.
Cause What to do
PLQ-30/PLQ-30M User’s Guide
Troubleshooting 80