Epson PLQ-30 - Manual (Page 54)

About Your Printer’s Default Settings
The default settings control many printer functions. While you can often set these functions through
your software or printer driver, you may sometimes need to change a default setting from the printer’s
control panel using the default setting mode.
For a detailed description of the settings you can change in the default setting mode, see
“Understanding default settings” on page 54. For instructions on changing the settings, see
“Changing default settings” on page 68.
Understanding default settings
This section describes the settings and options available in the default setting mode.
❏ In the default setting mode, you can select items you want to set from the main menu.
❏ From the Common settings menu, you can change the settings for the common items, which are
effective in all the emulation modes.
❏ From the Target Printer Mode settings menu, you can then select the target printer and change
the settings for each item from the Olivetti Mode, the Wincor Nixdorf Mode, the IBM Mode, or
the EPSON Mode.
❏ From the Olivetti Mode menu, you can select the PR2 emulation mode.
❏ From the Wincor Nixdorf Mode menu, you can select the WNI4915 emulation mode.
❏ From the IBM Mode menu, you can select the IBM4722 emulation mode.
❏ From the EPSON Mode menu, you can select the ESC/P2, IBM PPDS, or ESC/P2+ESC/MC
emulation modes.
These settings are shown in the following tables and explained in detail after each table.
To access and change a setting, see “Changing default settings” on page 68.
Default setting mode
The following table lists the default settings and the options you can select in the default setting mode.
The settings are explained in detail after the table. For instructions on changing the default settings, see
“Changing default settings” on page 68.
PLQ-30/PLQ-30M User’s Guide
Control Panel 54