Epson PLQ-30 - Manual (Page 17)

Loading Passbooks
!
Caution:
Always use the printer with the ribbon cartridge installed. Otherwise, paper jam may occur.
You can load vertical-fold and horizontal-fold passbooks. Follow the steps shown below to load
passbooks.
1. Turn on the printer.
2. Open your passbook to the page to be printed.
Note:
Make sure that you press any bulging parts of the folded passbook down to 0.6 mm or less before
inserting it into the front slot. For information on the thickness of passbooks you can print, see
“Paper/Media” on page 111.
3. Insert the passbook into the front slot with the printable side face up and the magnetic stripe facing
away from the printer until the top part of it reaches the roller inside. The printer loads it
automatically to the correct position and the passbook is ready to be printed.
PLQ-30/PLQ-30M User’s Guide
Paper Handling 17