Epson PLQ-30 - Manual (Page 74)

WNI4915 mode
State of panel lights Beep pattern Problem
Solution
N Power
F Ready
N Offline
There is no paper loaded in the slot.
Load a paper into the front slot.
Paper is not loaded correctly.
Remove the paper and reload it correctly. See “Loading Passbooks”
on page 17, or “Loading Single Sheets” on page 18.
Paper is not fully ejected.
Press the F1/Eject button to eject paper.
Paper is jammed in the printer.
To clear the paper jam, see “Clearing a Paper Jam” on page 82.
N Power
N Offline
The printer cover is open.
Stop the operation and close the printer cover.
N Power
F Offline
— The print head is overheated.
Wait for a few minutes; the printer resumes printing automatically
once the print head cools.
N Power
F Ready
F F1/Eject
F Offline
F F2
An unknown printer error has occurred.
Turn off the printer and leave it off for several minutes; then turn on
the printer again. If the error recurs, contact your dealer.
N = on, F = flashing
= short series of beeps (three beeps)
= long series of beeps (five beeps)
PLQ-30/PLQ-30M User’s Guide
Troubleshooting 74