Enterasys Networks MicroMMAC-T User Manual
Page 44
The MicroMMAC-T Chassis View
2-26
Managing the Hub
UPS ID
Displays the manufacturer and model type code of the UPS attached to the
modem port of the MicroMMAC-T. You must assign this type code for the UPS
window to be active. (See
, below, for instructions for setting
the type code for your UPS.) The valid type codes are:
•
Model 370
•
Model 400
•
Model 600
•
Model 900
•
Model 1250
•
Model 2000
UPS Uptime
Displays the number of hours that the UPS has been operating since the last time
it was started up.
Line Voltage
Displays the voltage coming through the line attached to the MicroMMAC-T.
Battery Output
Displays the amount of battery output voltage.
Battery Capacity
Displays the percentage of remaining battery capacity (100% indicates a fully
charged battery).
Test Results
Displays the result of the last self-test performed by the UPS. The possible test
results are:
Unit OK
The UPS unit is in working order.
Unit Failed
The UPS unit has failed the self-test. Check the
unit for damage or consult your UPS User’s
Manual.
Bad Battery
The UPS unit battery is bad.
No recent test
No UPS self-test has been performed in the last
five minutes.
Unit in test...
The UPS is currently in test mode.
Please standby