Pressure Systems 98RK-1 - Manual (Page 98)

Pressure Systems, Inc. 98RK-1 & 9816 User’s Manual©
Page 96 www.PressureSystems.com
NETWORK QUERY (UDP/IP Command 'psi9000')
Purpose:
To determine how many (and which) modules are powered-up and operational
on the network.
Command
“psi9000”
Response
"ipadr, ethadr, sernum, mtype, fmwver, connst, ipadrst, lisport,
subnet, iparpst, udpast, pwrst, rack, cluster, slot,"
Description: When a NetScanner ™ System module receives this broadcast command (by
continuously monitoring port 7000) it responds with a broadcast (on port 7001)
with an ASCII response containing comma-separated parameters. These are
listed in the following table:
parameter meaning
ipadr IP Address
ethadr Ethernet Address
sernum Serial Number
mtype Module Type (e.g., = 903x)
fmwver Firmware Version (e.g., = 4.30)
connst Connection Status (1=connected, 0=available)
ipadrst IP Address Status (1=has one, 0=waiting for
server)
lisport TCP Connect Port (default = 9000)
subnet Subnet Mask
iparpst IP Address Resolution Method
(1=use RARP/BOOTP server,
0=use static IP Address stored internally)
udpast UDP Auto Status (1=broadcasts this response
automatically after connection possible, 0=only
sends response for “psi9000” UDP/IP command.
pwrst Power Up Status (same a ‘q02' command
response)
rack Rack 0-F (0-15) of 98RK-1 chassis
cluster Cluster 0-F (0-15) of 98RK-1 chassis
slot Slot 1-8 of Model 9816 module in 98RK-1 chassis