Pressure Systems 98RK-1 User Manual
Page 91

Pressure Systems, Inc. 98RK-1 & 9816 User’s Manual©
Page 89
www.PressureSystems.com
Example:
●
Send TCP/IP command to 9816 module (via its connected socket) requesting the most
recent calibration adjustment’s offset and gain terms (cc=00-01), and the adjacent
factory-determined transducer coefficients C0 through C4 (cc=02-06): for transducer 1:
Data requested in ASCII-hex format representing the internal binary floating point format
"u10100-06"
Response returned is:
"3B200A6E . . 00000000"
Note
The maximum response size is 300 characters. If the requested
range of coefficients requested exceeds this, the 9816 will return an
“N07” error response.
This manual is related to the following products: