beautypg.com

Pressure Systems 98RK-1 User Manual

Page 20

background image

Pressure Systems, Inc. 98RK-1 & 9816 User’s Manual©

Page 18

www.PressureSystems.com

Connect to any module. (When a connection has been established, the top of the module icon
will turn yellow.)

STEP 18

Select (left click) the module's icon in the Node map. Right-click on the module's
icon (in either the Node Map or the description box), and select (left click) on
"Connect" in the pull-down menu that appears. (See screen depiction below.)



As stated above, if the module's icon does not turn yellow when selected, the module did not
connect. Some possible causes for a failure to connect are:

There is an IP address incompatibility between the host computer and the module.

There are two modules with the same IP address.


For complete instructions on using NUSS for operating your modules, please refer to the NUSS
User's Manual, available from Pressure Systems.

This manual is related to the following products: