Pressure Systems 98RK-1 - Manual (Page 93)

Pressure Systems, Inc. 98RK-1 & 9816 User’s Manual©
Page 91 www.PressureSystems.com
Example:
● Send TCP/IP command to 9816 module (i.e., via its connected socket) with replacement
values for the channel’s offset and gain correction terms loaded into the module’s
volatile memory (cc = 00-01). Load these into channel # 8's Transducer Coefficient
array (aa=08):
“v00800-01 0.000 1.000”
Response returned is:
"A"
● Send command to 9816 module (via its connected socket) to change its default EU
output from psi to kPa. This will be done by changing the EU Pressure Conversion
Scaler to 6.894757.
"V01101 6.894757"
Response returned is
"A"