Pressure Systems 98RK-1 - Manual (Page 30)

Pressure Systems, Inc. 98RK-1 & 9816 User’s Manual©
Page 28 www.PressureSystems.com
The rack address is set via a 16-position (0 through 15) push wheel switch, located on the front
panel of the 98RK-1.
The slot addresses are numbered 1 through 8, starting from the leftmost slot in the 98RK-1 and
each scanner’s address is fixed by its physical presence in the rack.
The following illustration shows how a typical CRS addressing system would identify a
particular scanner:
Figure 2.9
Typical Depiction of C-R-S Scanner Identification
In the above depicted array, the CRS address of the shaded scanner would be 133, cluster 1,
rack 3 and slot 3.